| 防静电地板漆 |
| 添加时间：2020/11/13 16:23:52 浏览次数： |
| 防静电地板漆，漆膜表面电阻为106-109欧姆，优先防止静电荷泄露，消除静电积累和电磁干扰的危害。环氧防静电地坪拥有环氧树脂地坪的一切优异性能，可快速排泄静电电荷、防静电效力持久，表面电阻率达到106Ω－109Ω、地面电阻排泄符合国际GB6650－86A标准。该地板整体无缝，能达到：防尘、坚韧耐磨、耐冲击、耐重压、耐腐蚀、耐溶剂、平整亮丽、着色自由、便于清理、维护，保养，且使用寿命长之目的。 Anti static floor paint, film surface resistance of 106-109 ohm, priority to prevent static charge leakage, eliminate electrostatic accumulation and electromagnetic interference hazards. Epoxy anti-static floor has all the excellent properties of epoxy resin floor, which can quickly discharge electrostatic charge and has long-lasting anti-static effect. The surface resistivity reaches 106 Ω - 109 Ω and the ground resistance discharge meets the international gb6650-86a standard. The whole floor is seamless, which can achieve the purpose of dustproof, tenacity, abrasion resistance, impact resistance, heavy pressure resistance, corrosion resistance, solvent resistance, smoothness and brightness, free coloring, easy cleaning, maintenance and long service life. 常见种类 Common species 可根据不同的用途要求设计多种方案，如薄层装，1-5mm厚的自流平地面，防滑耐磨涂装，砂浆型涂装，防静电，防腐蚀涂装等。适用于各种场地，主要适用于重工业区，食品加工区，化学，机电，电子行业，实验室，航空，车库，医药，生物制剂，数控机床等具有抗化学腐蚀，防尘，防静电，耐磨损，耐压，抗菌等。人工合成的化学环保材料，主要分双酚A型、双酚F型等类型，其分子结构决定了环氧地坪化学稳定性较强，不易磨损，且耐压、抗冲击等特点，又不失颜色丰富的优势。环氧树脂地坪是由环氧树脂(可加砂浆)固化反应后形成的坚硬而致密的一体化地坪系统。 According to different application requirements, a variety of schemes can be designed, such as thin-layer installation, self leveling floor with thickness of 1-5mm, anti-skid and wear-resistant coating, mortar coating, anti-static coating, anti-corrosion coating, etc. It is suitable for all kinds of sites, mainly for heavy industry area, food processing area, chemical, mechanical and electrical, electronic industry, laboratory, aviation, garage, medicine, biological agents, CNC machine tools, etc., with chemical corrosion resistance, dust prevention, anti-static, wear resistance, pressure resistance, antibacterial, etc. Synthetic chemical environmental protection materials are mainly divided into bisphenol a type, bisphenol F type and other types. Their molecular structure determines that the epoxy floor has strong chemical stability, is not easy to wear, and has the characteristics of pressure resistance and impact resistance, but also has the advantages of rich colors. Epoxy resin floor is a hard and compact integrated floor system formed by curing reaction of epoxy resin (mortar can be added). 施工工艺 construction technology 1、地面处理：依据地面状况做好打磨、修补、除污、除尘； 1. Ground treatment: grind, repair, remove dirt and dust according to the ground condition; 2、防静电底漆：采用渗透性及附着力特强防静电底漆滚涂一道，增强表面附着力； 2. Anti static primer: roll coating one layer of anti-static primer with strong permeability and adhesion to enhance surface adhesion; 3、铜箔铺设 ：用导电铜箔全面铺设,以横向纵向每隔2m铺设铜箔;4、防静电砂浆：将防静电组份加入石英砂，用刮刀将其均匀涂布地面； 3. Laying of copper foil: fully lay conductive copper foil, lay copper foil every 2m horizontally and longitudinally; 4. Anti static mortar: add anti-static component into quartz sand, and evenly coat it on the ground with scraper; 检测方法 test method 防静电地坪漆验收测量前，应用洁净的纱布将表面擦干净，严重玷污的应用中性液清洗干净，然后将室内空调打开，保持一定温度连续开上23天，规定的温湿度条件下测量。放置电极前先用软布条擦去地表面所有尘物，电极表面在放置前要用干净的软布条粘上异丙醇不少于70%水擦拭干净。 Before the acceptance measurement of anti-static floor paint, clean gauze shall be used to wipe the surface, and neutral solution shall be used to clean the seriously soiled floor paint. Then, the indoor air conditioner shall be turned on to maintain a certain temperature for 23 consecutive days, and the measurement shall be conducted under the specified temperature and humidity conditions. Before placing the electrode, wipe off all dust on the ground surface with a soft cloth, and wipe the electrode surface with Isopropanol at least 70% water with a clean soft cloth. |
| 上一页 防静电地坪漆在计算机房，电子车间和无尘车间中地面发挥的作用如何 |
| 下一页 防静电地坪漆性能特点 |