| 环氧防静电地坪漆施工工艺 |
| 添加时间：2019/6/11 16:44:47 浏览次数： |
| 环氧防静电地坪漆施工工艺 Construction Technology of Epoxy Antistatic Floor Paint 1、地面处理 : 依据地面状况做好打磨、修补、除污、除尘。 1. Ground treatment: grinding, repairing, decontamination and dust removal according to the ground condition. 2、环氧防静电地坪底漆:采用渗透性及附着力特强防静电底漆滚涂一道，增强表面附着力。 2. Epoxy anti-static floor primer: Roll one anti-static primer with strong penetration and adhesion to enhance surface adhesion. 3、铜箔铺设 :用导电铜箔全面铺设一道。 3. Copper foil laying: use conductive copper foil to lay one piece in an all-round way. 4、防静电砂浆:将防静电组份加入石英砂，用镘刀将其均匀涂布多道。 4. Anti-static mortar: Anti-static components are added to quartz sand and uniformly coated with a trowel. 5、防静电腻子:用防静电组份加入适量腻子粉，用镘刀将其均匀涂布多道。 5. Anti-static putty: add proper amount of putty powder with anti-static component and evenly coat it with trowel knife for multi-channel. 6、防静电面漆:用防静电面漆滚涂或用防静电自流平馒涂。 6. Anti-static topcoat: roll-coating with anti-static topcoat or self-leveling steamed bread with anti-static topcoat. 7、环氧防静电地坪漆投入使用时间:以250C为准，24小时后方可上人，72小时后方可重压。 7. Use time of epoxy anti-static floor paint: 250C, 24 hours later, and 72 hours later, it can be re-pressurized. |
| 上一页 环氧地坪漆养护建议 |
| 下一页 环氧防静电地坪漆施工工艺 |